For pricing and availability, please send an email to info@industrytechstore.com
SKU: 2401TR15MCBSxxx
Category: Restricted
UTI
15m Restricted TRIMODE Gauging Unit
Brand:
MMC
Part
Number: 2401TR15MCBSxxx
Standard
Applications:
Other
Applications:
These
portable FLEXI-DIP® “UTI” gauging tapes provide a convenient and accurate means
for measuring ullage, lower oil-water interface and temperature.
MMC’s UTI gauging tapes are capable of detecting all floating and non-conductive hydrocarbons. Each instrument is designed for ease of use. Gauging for liquid or interface level is accomplished simply and quickly. When the electronic probe is lowered and senses a hydrocarbon, a steady horn tone is sounded and a yellow LED illuminates. When sensing an oil-water interface or a non-conductive liquid heavier than water, an intermittent horn tone sounds and a red LED starts flashing. This gauging system is certified as “Intrinsically Safe” for use in all class IIC hazardous atmospheres.
Specifications:
Display
Readable Temperature
*Reading
Limit Due to 3-1/3 Digit LCD Display on °F Range |
°F
= -40° to 199.9°*
°C
= -40° to 150.0° |
Guaranteed
Temperature Calibration Range |
32°F
to 190°F
(0°C
to 88°C) |
Accuracy
Over Calibration Range |
±0.2°F
(±0.1°C) |
Accuracy
Linear Measurements |
±1/8”
(±2.0 mm), Plus ±0.1% of
Total Tape Length, worst case |
Minimum
Detectable Tank Bottom Liquid Level |
3/8”
(10mm) |
Minimum
Detectable Floating Product Level |
1/8”
(3mm) |
Batteries
for Intrinsically Safe Operation Only (Supplied) |
Duracell
MN1604 |
Battery
Drain (Temperature Mode) |
1.3
ma (In Air)
2.6
ma (In Fluid) |
Display |
3-1/2″
Digit Liquid Crystal
Display
1/2” Character Height |
Operating
Temperature Limit of Liquid Crystal Display |
-40°F
to 176°F
-40°C
to 80° |
Storage
Temperature Limits |
-67°F
to 185°F
-55°C
to 85°C |
Tape
Length |
50
ft (15 m) |
Hazardous
Environments |
Certified
Intrinsically Safe BASEEFA/SIRA/CSA
I, Gas
Groups C & D |