Sedni Power Management Module- PMM

Power Management Module- PMM

Brand: SEDNI

Model: PMM

The Power Management Module, PMM, is a local acquisition and control module, part of SEDNI’s DIAMAR® Automation System.

Main module purpose is the control of generator sets of a power plant (PMS): engine start/stop, synchronization, coupling, load sharing, bus-tie breakers, heavy consumers, PTO’s, etc.

Signals are processed internally and transferred through 3 CAN-BUS lines (triple redundancy) to the Remote Stations where all monitoring and control functions are available for the operators.

• 8 digital input channels.
• 8 digital output channels.
• 2 analog inputs (4 - 20 mA or 0 - 10 V).
• 2 analog outputs (4 - 20 mA or 0 - 10 V).
• 4 solenoid outputs.
• 2 AC voltage inputs (VAC) (600 v max.).
• 1 AC current input (IAC) (5 A max).
• Integrated sensor for temperature monitoring in PCB.
• Voltage monitoring in microprocessor.
• Suitable for direct mounting in engine room units (in cabin or console). Possibility to be mounted on engines, etc… (4G).
• Prepared to be installed directly in the Main Switch Board.
• Galvanic Isolation between power, digital inputs, digital outputs, analog inputs and outputs, AC inputs and CAN bus lines.
• LED status indication.
• Power supply: 18 – 36 VDC
• Power consumption: 16 W
• Working temperature: -25ºC/+70ºC
• Storage temperature: -40ºC/+80ºC
• Relative Humidity: 95%
• 3 CAN BUS lines.
• 1 RS422/485 line.
• Vertical or horizontal mounting with screws.
• Size: 175 x 362 x 36 mm
• Weight: 1,05 Kg.